1/0 GA Power / Ground Ultimate Wiring Kit

X2K01

1/0 GA Power / Ground Ultimate Wiring Kit

$339.99

X2K01

New product

This product is no longer in stock
Stinger X
1/0 GA Power Wiring Kit View larger

Stinger X Ultimate Wiring Kits are designed to provide the highest power transfer and system flexibility for no compromise installations. Engineered to unleash the maximum performance from your system. First, is the power distribution block to rule them all: X-LINK. With its ability to transform from an inline fuse holder to an expandable power, ground, or power and ground distribution block, while able to accept 0, 4, or 8GA input/outputs and either ANL or MIDI/AFS fuse. The X-LINK block is accompanied by Hyper-Twist Tru-Spec Wire, Expert Ground Terminals, Power Terminals, Wire Ferrules Remote Turn-on, and an accessories pack to complete the installation.
Power delivery, and just as important but often overlooked, ground integrity, are the main goals of this kit. So, to make sure the ground potential is as equally robust as the power delivery, we have included a ground reinforcement cable to be used from the battery to the chassis, and on the amplifier side the Expert Ground Terminal for a large footprint, low resistance, non-rotating grounding terminal.
All these elements add up to the ULTIMATE wiring kit and system performance from Stinger X.
To complement the power and ground delivery performance, we would recommend utilizing other leading products from Stinger X; including interconnects, optical cables and sound damping products for the best power and sound available.




Products Included

  • (1) 18ft./5.5m Matte RED Hyper-Twist 1/0GA Power Wire
  • (2) 3ft./0.9m Matte Clear Hyper-Twist 1/0GA Ground Wire
  • (1) 17ft./5.2m Matte CLEAR 18GA Remote Turn-On Wire
  • (1) XFDB108 XLINK Expandable Fuse Holder
  • (1) 300 Amp Shoc-Krome ANL Fuse
  • (3) 1/0GA Crimp Ring Terminals Pre-Installed (2 Ground 1 Power)
  • (2) 1/0GA Crimp Ring Terminals
  • (1) 18GA Fork Terminal
  • (1) Grey Boot to match ground wire
  • (1) RED Boot to match power wire
  • (1) 16GA Blue Butt Connector
  • (1) 1/0GA Snap In Protective Firewall Grommet
  • (6) Self-Drilling Mounting Screws
  • (10) 7”/17.8cm Wire Ties
  • (1) 1/0 Ga Expert Terminal
  • (1) 18 Ga Ferrule
  • (3) 1/0 GA Ferrules with Stinger Heat Shrink Tubing